COMPLETED Fusee-LEDE Dongle (6$ payload injector)

Discussion in 'Switch - Exploits, Custom Firmwares & Soft Mods' started by capitaineflam25, Jun 24, 2018.

  1. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    I followed these steps, and have been met with no success.
    The payload is not injected on boot, and the SSID is not being broadcast anymore. I seem to have simply bricked the tiny thing. Any ideas? I don't have an ethernet port and don't really feel like dropping cash on an adapter on something that might not work.
     
  2. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    If you flashed uboot you can put one of the later firmwares with wifi enabled on a FAT formatted flash drive, insert it into the dongle and turn it on while holding the reset button. It might take a few tries but eventually it should reflash it.
     
    OkazakiTheOtaku likes this.
  3. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    So, I just tried that and have some fun flashing LED lights but unfortunately the guide that came with it is entirely in Chinese.
    I think I flashed uboot successfully; it did and said exactly what the guide told me. But ever since I rebooted it, it does not want to broadcast anything.

    Huh, while I was typing the above paragraph some new stuff happened. Now it's broadcasting "3GWIFI_XXXX" (like, it actually has the Xs, it's not just a placeholder) but the password thats printed on it isn't working. I used your most recent firmware.bin. Do you know what it is?
     
  4. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    It's 12345678

    Glad it's working. :) Enjoy!
     
    OkazakiTheOtaku likes this.
  5. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    That's not it :(
    Warning: Spoilers inside!
     
  6. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    OkazakiTheOtaku likes this.
  7. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
  8. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    Do you have any other devices you can test it on?
     
    OkazakiTheOtaku likes this.
  9. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    I reflashed your firmware and while the password still isn't working on my laptop, it did work on my phone. But when I try to telnet into 10.1.5.1 it is refusing the connection.
     
  10. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    Lede uses SSH instead of Telnet so you need to switch to an SSH client. At this point you don't need to though. You can switch payloads using the usb method or by connecting to the SSH port with an SCP client.
     
    OkazakiTheOtaku likes this.
  11. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    Alright, I SSH'd in as root, changed the payload, tested it on my switch (it worked) and then...when I disconnect the router from power and reconnect it to power, it doesn't boot again, like before. argh.
    Any ideas?

    EDIT: When it boot loops like this, both the red and blue lights are on, fwiw
     
  12. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    This is new behaviour to me, must be a quirk or fault with your device.
     
    OkazakiTheOtaku likes this.
  13. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    Just tried again, it boots just fine if the USB drive with the firmware.bin is inserted and the reset button is held on boot. But otherwise, nada. Damn. Lemme try something quick
     
  14. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    That doesn't sound good. I wouldn't want to have to flash the image every time you boot.
     
    OkazakiTheOtaku likes this.
  15. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    Hm. What's this firmware's way to do mtd_write?
    Warning: Spoilers inside!
     
  16. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    sysupgrade -v /mnt/firmware.bin
     
    OkazakiTheOtaku likes this.
  17. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    It works perfectly now! Thank you for your help! I'm going to do some more in-depth testing but all seems to be perfect. Thank you so much!
     
    FGFlann likes this.
  18. FGFlann

    FGFlann GBAtemp Regular

    Member
    2
    Nov 10, 2015
    My pleasure. :) Happy to help.
     
    OkazakiTheOtaku likes this.
  19. OkazakiTheOtaku

    OkazakiTheOtaku no thanks, I don't want a custom title

    Member
    6
    Jul 20, 2016
    Japan
    ~/
    Also, in my excitement I forgot to say how I solved it. I did the sysupgrade command as root over ssh and I guess that fixed the corrupted boot or whatever it was.
     
    FGFlann likes this.
  20. XC-3730C

    XC-3730C GBAtemp Advanced Fan

    Member
    3
    May 10, 2014
    United States
    So what's the best micro router with battery and USB-C? Preferably one that I can buy from within the USA...
     
    solitaire4eva likes this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice