Question I cannot send payload to the "newly purchased" switch (model 2018 HAC-S-JXE-C3).

Discussion in 'Switch - Backup Loaders & Modchips' started by gnilwob, Jul 10, 2018.

  1. gnilwob
    OP

    gnilwob GBAtemp Regular

    Member
    2
    Mar 16, 2008
    Hong Kong
    Hi all, I cannot send payload to the "newly purchased" switch (model 2018 HAC-S-JXE-C3).
    I am sure that I follow the working steps for my other 2 switch consoles.
    I am sure that my PC has APX driver installed.
    I used the same PC to send payload to 3 different switch consoles but only the "newly purchased" console that it does not work.

    I updated the video which I tried to send payload to the console but failed.

    (Sorry my English is not good)

    I tried searching the forum for the hardware revision but the information is very limited.
    So would like to ask if the new switch console hardware is patched ?
    Thanks.


    ==================Update on 12th July below====================


    I went out to get another spare Nintendo Switch on the same model but lower serial number.
    And it still works fine.
    I hope this video give you the idea to avoid XAJ7004XXXXXX if you want to exploit your nintendo switch.
     
    Last edited by gnilwob, Jul 12, 2018
  2. Chu-Fat

    Chu-Fat Newbie

    Newcomer
    1
    May 15, 2018
    Philippines
    did you check if your SD card is working?
     
  3. gnilwob
    OP

    gnilwob GBAtemp Regular

    Member
    2
    Mar 16, 2008
    Hong Kong
    Hi, BISKEYDUMP.BIN does not need any sdcard to be inserted into switch.
    I am pretty sure that I follow the working step to send payload (at least on 2 different older consoles).
    Thanks for your input :)
     
  4. zoogie

    zoogie playing around in the dsiware

    Member
    19
    Nov 30, 2014
    Micronesia, Federated States of
    What firmware was this switch on when you opened it?
     
  5. MYFW

    MYFW GBAtemp Regular

    Member
    2
    Apr 1, 2014
  6. gnilwob
    OP

    gnilwob GBAtemp Regular

    Member
    2
    Mar 16, 2008
    Hong Kong
    I cannot remember it was on either 4.0.1 or 4.1.0 but not on 5.x.x
    I updated it to 5.1.0 by myself.

    — Posts automatically merged - Please don't double post! —

    I do not have android phone :'(
    Anyway, I don't see any mistake in my steps to send the payload.
    So I am not sure if changing to NXLoader would help ?
    I will try when I have an android phone on my hand.
    Thanks.
     
  7. Milenko

    Milenko GBAtemp Advanced Fan

    Member
    4
    Oct 16, 2017
    Australia
  8. MYFW

    MYFW GBAtemp Regular

    Member
    2
    Apr 1, 2014
    I would try, at least to rule out
     
  9. PabloMK7

    PabloMK7 Red Yoshi! ^ω^

    Member
    8
    Feb 21, 2014
    Spain
    Yoshi's Island
    It cannot be a mariko console as the mariko drivers were introduced in 5.0.0 and the console came with 4.1.0
    So:
    • You are doing something wrong.
    • There is a new hardware revision but it isn't mariko.
    • mariko chip is able to run with the old drivers.
    • It uses an special 4.1.0 build that supports mariko.
    I think the only way to confirm is to read the part number printed in the SoC.
     
    Last edited by PabloMK7, Jul 10, 2018
  10. mdd.45

    mdd.45 Member

    Newcomer
    4
    Jan 12, 2004
    Greece
    Athens, Greece
    reposted:

    try connecting a usb hub (even a cheap usb 2.0 hub) between pc usb port and usb a-c cable and switch

    when i was bridging pins 9 and 10 on right joycon only this way i could execute the payload correctly. No i'm bridging pin 1 and 10 and i don't need the usb hub in between to execute the payload with all the other components being the same.
     
  11. bluke

    bluke GBAtemp Regular

    Member
    3
    Feb 2, 2010
    try to change another usb cable. Sometimes cable fault then you stuck at black screen.
     
  12. isoisoiso

    isoisoiso Member

    Newcomer
    1
    Jun 16, 2018
    Argentina
    They probably removed RCM on new hardware revisions which is what we were expecting
    Can you give it back and ask for a 2017 model?
     
  13. Viri

    Viri GBAtemp Advanced Maniac

    Member
    9
    Sep 13, 2009
    United States
    Just go back to the store, and claim the joycons don't work properly, just say they desync a lot. I doubt the sales person will give a shit enough to bother checking, and will probably refund your money, or let you exchange.
     
  14. gnilwob
    OP

    gnilwob GBAtemp Regular

    Member
    2
    Mar 16, 2008
    Hong Kong
    There are some peoples who has the same model HAC-S-JXE-C3 but on a lower serial number compare to mine (my serial number is XAJ70043979XXX)
    They can still successfully send payload to their console.
    Another person with same issue and same model has not given any serial number information yet.

    For my case, I know exactly what I am doing. I have 3 consoles, other 2 older consoles work fine every single time.
    So I don't think it is my error for not able to send payload to my latest console.
    You can see in the video that I verified if the Switch in on RCM (APX device detected) before sending payload.

    It is very difficult to do that with local shop in Hong Kong :'(
    Thanks for the idea anyway.
     
  15. fotuwe

    fotuwe Member

    Newcomer
    1
    Jun 10, 2018
    Germany
    Oh damn ... so I shouldnt wait any longer to get a 2nd switch ...
     
  16. Subtle Demise

    Subtle Demise h

    Member
    8
    Sep 17, 2009
    United States
    I wonder when scalpers are going to start hoarding 2017 Switch models. Looks like SX is going to be short-lived.
     
    senas8 and mark.m.moran like this.
  17. kitzuki

    kitzuki GBAtemp Regular

    Member
    3
    Jan 29, 2008
    United States
    mark.m.moran likes this.
  18. xabier

    xabier GBAtemp Regular

    Member
    3
    Dec 10, 2006
    If you keep it firmware 4.1 por lower it would still be explooitable vía softwarehax (dejah vu).

    Updated to 5.x means that all (known) software exploits are done.
     
  19. jakkal

    jakkal GBAtemp Maniac

    Member
    9
    Apr 27, 2018
    United States
    time to get me another switch
    just sold one with 60 games for 500 bucks
     
    mark.m.moran likes this.
  20. adrifcastr

    adrifcastr GBAtemp Advanced Maniac

    Member
    7
    Sep 12, 2016
    Germany
    They are definately not removing the tegra recovery mode, hilarious idea. They're switching the T210 SoC to the T214 which is immune to the exploit that enables ace through the rcm
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice